Home > News Center > Industry News

News Center

Related news

No search results found!

What's the difference between hardware mold and stamping die?
2020-06-09 17:06:51

For automotive stamping parts, because they are website products and keywords, so in terms of learning requirements, they should be comprehensive and specific. Therefore, the knowledge content and related difficult problems are involved, and none of them can be omitted. So, based on this, we will start to do it immediately to improve your learning efficiency.

1. For the inspection of automobile stamping parts, what is the flush in the gauge measurement? In addition, which parts of the car need to have a four-step stamping process?

For the inspection of automobile stamping parts, the English flush in the inspection tool measurement, its professional explanation, is the flush inspection. In the automotive parts, there are four steps of stamping process, which are for some large covering parts, and they are also automotive stamping parts.

2. Is there any difference between stamping die and metal stamping die in automobile stamping parts?

If the stamping die in automobile stamping parts is compared with the metal stamping die, then there are differences between the two. For the former, there are many technical requirements for side a, while for the latter, there are no such requirements. Therefore, this conclusion can be drawn. Therefore, the main difference between the two lies in the technical requirements.


Automobile stamping parts


3. What are the specific requirements for automobile stamping parts in terms of raw materials?

For automobile stamping parts, the specific requirements on raw materials are as follows:

The raw materials of stamping parts shall be provided with quality certificates and conform to relevant technical requirements. Otherwise, they cannot be used. In addition, some corresponding analysis or test can be carried out to check the performance of the material and whether there are defects, so as to judge whether it is available. In addition, if necessary, raw materials can be retested to ensure that there is no risk.

In the selection of materials, firstly, according to the type and use characteristics of automobile stamping, the metal materials with different mechanical properties are selected to achieve the purpose of not only ensuring product quality, but also saving materials.

Generally, the following principles should be followed when selecting the materials of automobile stamping parts:

A. the selected materials shall first meet the service performance requirements of auto parts;

B. the selected materials shall have better technological properties;

C. the selected materials shall have better economy.


KEY WORDS

Auto Body Parts,Sheet Metal Body Parts,Auto Parts Manufacturer

CONTACT US

Phone:+86-15366916688
Xinggang Avenue NO.6,Genggeng Industrial Zone,BaoYing Couty,JiangSu Province,China.