How to Maintain Automobile Parts to Extend Their Life

2019-10-12 11:47:07

Avoiding heat

Excessive temperature of engine piston can easily lead to overheating and melting and cylinder holding; overheating of rubber seals, triangular belts, tires, etc., can easily lead to premature aging, performance degradation and shorten service life; overheating of coils of electrical equipment such as starters, generators, regulators, etc., can easily cause burnout and scrap.

Avoiding adversity

The engine cylinder cushion should not be reversed in installation, otherwise it will cause premature ablation damage of the cylinder cushion; the engine fan blade should not be reversed in installation; for directional pattern tire, herringbone pattern tire, the ground mark after installation should make the herringbone point to the rear.

Avoiding Dirt

If the parts of fuel filter, oil filter, air filter, hydraulic oil filter and various filters are too dirty, the filtering effect will be worse. Water tank radiator, air-cooled engine cylinder block and cylinder head radiator, cooler radiator and other parts are too dirty, which will lead to poor heat dissipation and high temperature.

Deficiency avoidance

Engine valve lock should be installed in pairs, such as missing or missing valve will lead to valve out of control and crash piston and other parts; engine connecting rod bolts, flywheel bolts, transmission shaft bolts installed on the opening pin, locking screw, bumper or spring pad and other anti-loosening devices, once missing, will likely lead to serious failure in use; engine timing gear room used to lubricate teeth; Once the oil nozzle of the ship is leaked, it will lead to serious oil leakage at this place.

Avoid washing

For the paper air filter element of the engine, no oil can be used for cleaning; for the leather parts, oil is not suitable for cleaning.

Oil Avoidance

The paper filter element of the engine dry air filter, if stained with oil, can easily make the mixture with higher concentration suck into the cylinder, resulting in insufficient air, increased fuel consumption and decreased engine power; if the triangular tape is stained with oil, it will accelerate its corrosion aging; if the brake shoe, friction disc of the dry clutch and brake belt are stained with oil, the driving safety will be threatened. Tire rubber is very sensitive to oil corrosion. Contact with oil will make rubber soft or peeling.

Pressure avoidance

If the tire tire is stored under long-term stacking and not turned in time, it will be deformed by extrusion; paper filter elements of air filter and fuel filter, such as extrusion, can not play a reliable role in filtering; rubber seal, triangular tape, tubing and so on can not be extruded.

Avoiding duplication

Some parts should be used once, but some drivers or repairmen reuse them in order to save money or because they don't know the "taboos", which easily leads to accidents.

Avoid close fire

Rubber products such as tyres, triangular belts, cylinder liners, water blocking rings and rubber oil seals are prone to aging, deterioration or damage if they are near the fire source. On the other hand, they may cause fire accidents.